Sleeve Bearings

Contact Now

Sleeve bearings offer several advantages, including lower cost, less maintenance, greatly reduce noise at low speeds and easier installation. Sleeve bearing performance is also marked by a higher load capacity, especially shock load resistance due to their greater contact zone. Sleeve bearings with a conformal liner compensate for misalignment issues and vibration damping, these one-piece design low-friction bearings reduce housing dimensions and weight by having a thin wall section.

Sleeve bearings can be made from bronze, steel or stainless steel. Brass bearings and plastic sleeve bearings are also manufactured for certain applications. A common type of sleeve bearing that works well in applications requiring constant lubrication is bronze sleeve bearings, which sometimes contain lubricant plugs (PTFE or graphite) to help with lubrication issues. Another sleeve material used for light to medium applications, called oil impregnated bronze sleeve bearings, contains pores that absorb oil, which is released under applied force and then reabsorbed back into the bearing once the force subsides.

ISOSTATIC AA-506-1 Sleeve Bearings

Bearing 2.25 Inch | 57.15 Mi
Tapered Roller Beari Cone; Standard Preci

ISOSTATIC AA-506-7 Sleeve Bearings

Pillow Block N/A
0.0 Double Row

ISOSTATIC AA-707-2 Sleeve Bearings

NTN 4547359155921
NTN M06110

ISOSTATIC SS-68-4 Sleeve Bearings

0.0 M06288
Teflon Labyrinth N/A

ISOSTATIC AA-615-2 Sleeve Bearings

B04270 Precision Ball Beari
17MM Bore; 40MM Outs Duplex-Back to Back

ISOSTATIC AA-615 Sleeve Bearings

Triple Lip Nitrile R Spherical Roller Bea

ISOSTATIC AA-630-2 Sleeve Bearings

Contact Seal Non-expansion
AMI BEARINGS 1.22 Inch | 31 Milli

ISOSTATIC AA-630-1 Sleeve Bearings

M06110 0.0

ISOSTATIC AA-630-7 Sleeve Bearings

M06110 Bearings
0.11 NTN

ISOSTATIC AA-630 Sleeve Bearings

1.89 Inch | 48 Milli 1 Rib Outer Ring
TIMKEN Ball Bearing

ISOSTATIC SS-48-8 Sleeve Bearings

1.272 8482.10.50.68
50MM Bore; Tapered A 0.906 Inch | 23 Mill

ISOSTATIC AA-630-11 Sleeve Bearings

Allowable Misalignme B00152
25MM Bore; Shaft Mou Self Aligning Ball B